Latex Inks for screen printing
on Latex Balloons

---

SILKSCREEN INK (LATEX SERIES)
This is a highly viscous ink available in a variety of colors for use in the usual silk-screening method of decorating any rubber latex object.

* Color shades shown above may vary from original ink 

Printing Specifications
Recommended  Mesh: 200-305 mesh
Silkscreen inks are concentrated and should be diluted with a mineral spirit solvent in the range of 30% solvent to 70% ink by volume.
Drying Time: 3-5 minutes. If using a dryer, however, keep the temperature between 150ƒ-180ƒF.
Reducer/ Thinner: Use Mineral Spirits as a Reducer, Mix for at least 10 to 15 minutes with a high speed mixer prior to use.