POLYFLEX - High Opaque /Low Bleed Inks
High Opaque Low Bleed inks are designed for printing on Polyester fabrics such as Jerseys, Athletic uniforms and Poly blend fabrics that are pron to dye-migration.
Curing tests should be made prior to any production run. Failure to cure properly causes poor wash fastness, inferior adhesion and increased dye migration.
Our Plastisol inks are Non-Phthalate Certified and in compliance with C.P.S.A., Tittle 16, Part 1303 and Federal Hazardous Substance Act Part 16 of Lead Content and certain phthalate plasticizers. Click here to view the Test Report
Picture
Ultra Poly White
9009PW Sportswear Poly White
Substrate: 100% Polyester and Poly-blend fabrics
Mesh: 90 - 130ct - CURING TEMP: Flash-cure: 230°F - Full Cure: 280°F
9009PW Sportswear Poly White
9009PW Sportswear Poly White - 5gal
Picture
Titan Poly White
9008PW Titan Poly White
Substrate: 100% Polyester and Poly-blend fabrics
Mesh: 90 - 130ct - CURING TEMP: Flash-cure: 230°F - Full Cure: 280°F
9008PW Titan Poly White
9008PW Titan Poly White - 5gal
WM Poly LB/HO Series Plastisol Inks
PRINTING RECOMMENDATIONS:
Substrate: 100% Polyester and Poly-blend fabrics
Mesh: 90 - 130ct
CURING TEMP: Flash-cure: 230°F - Full Cure: 280°F
LB/HO Plastisol Inks - Size:
Select your Color:
LB/HO Plastisol Inks - Size:
Select your Color:
3000FF Curable Reducer
High Opaque/ Low Bleed Plastisol inks should be stirred first to determine if modification is necessary. Addition of 1-3% (by weight) of Curable Reducer can be added to soften & adjust viscosity.
3000FF Curable Reducer